The Lost Mary Nera Fullview 70K works differently from a traditional sealed disposable. Instead of throwing away the entire device when its e-liquid runs out, the Nera Fullview uses a rechargeable battery base with two prefilled, replaceable pods. The current FlyingVape kit includes an 800mAh rechargeable battery and two 12mL pods, giving you 24mL of e-liquid and up to 70,000 rated puffs combined.

That modular design is the key to understanding how the Nera Fullview works. The battery base is reusable, while the pods are the replaceable part. Once a pod is finished, you can remove it and install another compatible pod instead of buying an entirely new device.

Here's everything you need to know about setting up, using, charging, and switching pods on the Nera Fullview 70K.

For a complete overview of its features and specifications, read our Lost Mary Nera Fullview 70K review.

What Comes in the Kit Box?

The Lost Mary Nera Fullview 70K Kit gives first-time users the complete system needed to get started.

According to the current FlyingVape listing, the kit includes:

• One 800mAh rechargeable Nera Fullview battery device
• Two prefilled 12mL pods
• 24mL total e-liquid capacity
• Up to 70,000 rated puffs, or up to 35,000 per pod
• 5% (50mg) nicotine salt
• Mesh-coil heating
• Curved LED display
• USB-C charging
• Normal and Turbo power modes
• Draw-activated operation
• Transparent Fullview e-liquid visibility

The two pods are the consumable part of the system. The battery base stays with you and can be recharged through its USB-C port.

If you already own the Nera Fullview battery, you don't need another complete kit when your pods run out. FlyingVape separately sells a replacement pack containing two 12mL prefilled pods.

How to Charge the Battery Base

The Nera Fullview uses an 800mAh rechargeable battery with USB-C charging. That means you don't replace the battery after it runs down; you recharge the device and continue using it.

To charge it:

1. Locate the USB-C charging port on the device.
2. Connect a compatible USB-C charging cable.
3. Connect the other end to an appropriate power source.
4. Allow the battery to charge according to the device's indicator.
5. Disconnect it once charging is complete.

The rechargeable design is particularly useful because the pods and battery are separate components. You can continue using the same battery base across multiple replacement pod packs.

FlyingVape's current listing also states that the device supports pass-through charging, meaning it can be used while connected to power.

For general safety, use the appropriate charging equipment and avoid charging damaged hardware or leaving a charging device unattended for extended periods.

How to Install a Pod — No Priming Needed

One of the easiest parts of the Nera Fullview system is that there is no manual priming step.

The pods are factory-filled and designed to be used with the Nera Fullview battery. FlyingVape describes the system as ready to use once the pod is connected.

To install a pod:

1. Take the prefilled pod from its packaging.
2. Remove the protective materials from the pod as instructed.
3. Align the pod with the battery base.
4. Press it into place until the magnetic connection holds it securely.
5. Check that the pod is seated correctly.
6. Take a draw to activate the device.

The pod connects magnetically, so you don't need to screw it into place or manually fill it with e-liquid.

The mesh coil is already built into the pod, and the pod is prefilled with 12mL of 5% nicotine salt.

Do not try to refill the pod yourself. FlyingVape identifies the Nera Fullview pods as factory-sealed replacement pods designed to be replaced when empty.

How to Swap Pods to Change Flavors

This is where the Nera Fullview's modular design becomes especially useful.

Each kit comes with two prefilled pods. When one is empty or you simply want to use the other flavor, you can remove the current pod and install the second one.

The basic process is:

1. Remove the current pod from the battery base.
2. Take the replacement pod.
3. Remove its protective packaging and seal.
4. Align it with the battery.
5. Press it into the magnetic connection.
6. Confirm that it is seated properly.
7. Draw on the device to vape.

FlyingVape states that the replacement pods are designed for the Nera Fullview battery and are not compatible with other Lost Mary devices such as the MT35K Turbo or MO20000 Pro.

This means you should always buy pods specifically made for the Nera Fullview rather than assuming another Lost Mary pod will fit.

The replacement pack contains two 12mL pods, giving you up to 70,000 combined rated puffs.

What the Fullview Display Shows

The display is one of the defining features of the Nera Fullview.

The device combines a curved LED screen with a transparent pod window, giving you more information about the device without having to guess.

The current FlyingVape listing confirms the curved LED display and transparent e-liquid visibility. It also identifies Normal and Turbo as the available power modes.

The system lets you keep track of key information such as:

• Battery status
• Current operating mode
• E-liquid level through the transparent pod
• Puff information

The transparent pod is particularly useful. Instead of waiting for the flavor or vapor to suddenly disappear, you can visually check how much e-liquid remains.

That's an important advantage for a high-capacity system because the actual number of puffs you get can vary depending on your draw length and usage.

Why There's No Fire Button

If you're used to a vape that requires you to press a button to take every puff, the Nera Fullview may initially feel different.

The device is draw-activated, meaning inhaling through the mouthpiece activates the heating system. FlyingVape specifically lists the Nera Fullview as draw-activated.

So, you don't need to hold down a fire button while inhaling.

The physical control is associated with changing the device's operating mode rather than manually firing it.

The Nera Fullview provides two modes:

• Normal Mode: Designed for a smoother, more efficient draw.
• Turbo Mode: Produces a stronger, warmer, more intense experience while using more e-liquid per puff.

This distinction is worth remembering because pressing the physical button is not the same as pressing a conventional fire button.

A Simple Way to Think About the Nera Fullview

The easiest way to understand the system is to separate it into two parts:

Battery base = reusable hardware

The 800mAh battery is rechargeable through USB-C. You keep this component and use it with compatible Nera Fullview replacement pods.

Pods = replaceable consumables

Each pod contains 12mL of prefilled 5% nicotine salt e-liquid and is rated for up to 35,000 puffs. Two pods provide 24mL and up to 70,000 rated puffs combined.

Once you understand that distinction, the Nera Fullview becomes much easier to use.

Final Thoughts

The Lost Mary Nera Fullview 70K is designed for people who want the convenience of prefilled pods without replacing the entire device every time their e-liquid runs out. Its rechargeable 800mAh battery, magnetic pod connection, transparent e-liquid window, curved LED display, and draw-activated operation make the system straightforward once you understand the two-part design.

The most important thing to remember is that there is no priming step and no conventional fire button. Connect a compatible prefilled pod, check the device, choose your mode, and draw to activate it.

Already have the battery base? FlyingVape also sells replacement Nera Fullview pods separately, so you can continue using the same device with a new two-pod pack.

Shop the Lost Mary Nera Fullview 70K Kit at FlyingVape.com